73
3.4.4 Storage Configuration
SATA Controller(s)
Use this item to enable or disable the SATA Controller feature.
SATA Mode Selection
This item is for SATA3_0, SATA3_1 and SATA2_2 to SATA2_5 ports. Use
and [RAID Mode]. The default value is [AHCI Mode].
new features that will improve SATA disk performance but IDE mode
does not have these advantages.
SATA Aggressive Link Power Management
Hard Disk S.M.A.R.T.
Use this item to enable or disable the S.M.A.R.T. (Self-Monitoring, Analy-
and [Enabled].
Marvell SATA3 M0 M1 Operation Mode
This item is for SATA3_M0 and SATA3_M1 ports. Use this to select
[AHCI Mode] and [RAID Mode]. The default value is [AHCI Mode].
Marvell SATA3 M2 M3 Operation Mode
This item is for SATA3_M2 and SATA3_M3 ports. Use this to select
[AHCI Mode] and [RAID Mode]. The default value is [AHCI Mode].
To Next Page
Loading...
