ASROCK Z790 Series - Page 58

54
VF Oset Mode
Selects between Legacy and Selection modes. Need Reset System aer enabling Over-
Clocking Feature to Initialize the default value. In Legacy Mode, setting a global oset for
the entire VF curve. In Selection modes, setting a selected VF point.
Conguration options: [Legacy] [Selection]
Ring Voltage Oset
Species the Oset Voltage applied to the Ring domain. is voltage is specied in mil-
livolts.
GT Voltage Mode
Selects between adaptive and Override Voltage modes. In Override Mode the voltage
selected will be applied overall operating frequencies. In Adaptive Mode the voltage is
interpolated only in turbo mode. is item appears when you use the onboard graphics.
Conguration options: [Adaptive] [Override]
Extra Turbo Voltage
Species the extra turbo voltage applied while the GT is operating in turbo mode. Unit is
in millivolts.
GT Voltage Oset
Species the Oset Voltage applied to the GT domain. is voltage is specied in mil-
livolts. is item appears when you use the onboard graphics.
System Agent Voltage Mode
Selects between Adaptive and Override Voltage modes. In Override Mode the voltage
selected will be applied overall operating frequencies. In Adaptive Mode the voltage is
interpolated only in turbo mode.
Conguration options: [Adaptive] [Override]
Extra Turbo Voltage
Species the extra turbo voltage applied while the SA Uncore is operating in turbo mode.
Unit is in millivolts.
System Agent Voltage Oset
Species the Oset Voltage applied to the Uncore domain. is voltage is specied in mil-
livolts.