ASROCK Z790 Series - 3.8 Boot Order and Settings

86
3.7 Security Screen
In this section you may set or change the supervisor/user password for the system. You
may also clear the user password.
Supervisor Password
Set or change the password for the administrator account. Only the administrator has
authority to change the settings in the UEFI Setup Utility. Leave it blank and press enter to
remove the password.
User Password
Set or change the password for the user account. Users are unable to change the settings in
the UEFI Setup Utility. Leave it blank and press enter to remove the password.
Secure Boot
Press [Enter] to congure the Secure Boot Settings. e feature protects the system from
unauthorized access and malwares during POST.
Secure Boot Mode
[Standard] Select this item and the system will automatically load the Secure Boot keys
from the BIOS database.
[Custom] Select this item and Secure Boot Policy variables can be congured by a physi-
cally present user without full authentication.