ASROCK Z790M-ITX WiFi

To Next Page

To Previous Page

Z790M-ITX WiFi

Step 4

Tighten the screws with a screwdriver

to secure the modules into place.

Please do not overtighten the screws

as this might damage the modules.

Step 5

Tighten the screws with a screwdriver

to secure the M.2 heatsink into place

in the order shown. Tighten screw

opposite the M.2 connector rst (2),

and then tighten the one next to the

M.2 connector (3).

*Please do not overtighten the screw

as this might damage the module and

M.2 heatsink.

For the latest updates of M.2 SSD module support list, please visit our website for details:

http://www.asrock.com

NUT1NUT2

ASROCK Z790M-ITX WiFi - Page 47