Need help?Do you have a question about the Assa Abloy EffEff 1338-15 and is the answer not in the manual?
General| Brand | Assa Abloy |
|---|---|
| Model | EffEff 1338-15 |
| Category | Control Systems |
| Language | English |
Provides important notes on regulations and a general overview of the control terminal's purpose and functions.
Details the differences and features of various emergency exit control terminal models (1338/1340 series).
Explains key operational behaviors like temporary and permanent unlocking, and system response to power changes.
Describes different alarm types (danger, sabotage, door monitoring) and their handling procedures.
Details the function of LEDs, key-operated switches, and illuminated buttons for status indication.
Provides a procedure to identify the cause of an alarm using the control terminal's displays and switch inputs.
Configuration options via internal jumpers (JP-1, JP-2) and function keys (S4.1 to S4.5).
Configures release times, pre-alarm times, and alarm times using preselection switches S1, S2, and S3.
Highlights electrical hazards, regulatory compliance, and essential safety notes before installation.
Guidelines for positioning the terminal near the exit and installing surface-mounted or flush-mounted versions.
Specifies cable requirements and procedures for opening the housing and replacing components.
Instructions for connecting to a bus system and setting user addresses for models 1338-20/-21 and 1340-20/-21.
Provides electrical data, possible locking elements, and terminal diagrams specific to the 1338 series.
Details electrical data, specs, locking elements, and terminal diagram for the 12V version of the 1340 series.
Details electrical data, specs, locking elements, and terminal diagram for the 24V version of the 1340 series.
Outlines initial commissioning checks, expert approval, and mandatory annual testing of escape route locking systems.
States that the control terminals require no maintenance but emphasizes the user's responsibility for regular testing.
Checklist for verifying component compliance, documentation, and correct installation according to regulations.
Steps to test system activation, locking status, alarm response, and reset functions for proper operation.
To Next Page
