To Next PageTo Next Page
Need help?Do you have a question about the Assa Abloy EffEff 1340-20 and is the answer not in the manual?
General| Brand | Assa Abloy |
|---|---|
| Model | EffEff 1340-20 |
| Category | Control Systems |
| Language | English |
Contact with live parts can lead to life-threatening electric shock; device only opened by certified electrician.
Modifications not described in manual are prohibited and can compromise safety features.
Missing button prevents independent exit in danger; requires building authority approval.
Commissioning requires qualified person; training available from ASSA ABLOY.
Owner responsible for installation/checking; regular expert testing required.
Must comply with building inspectorate regulations; training available.
Device or parts must be repaired by qualified person if faulty or damaged.
For commercial sector escape routes; tested to EltVTR; other uses/combinations not permitted.
Must be installed by certified electrician; comply with building authority and state regulations.
Mandatory compliance with building inspectorate requirements for safety concept and door modifications.
Terminal positioning: EMERGENCY OPEN button 850-1200mm above floor. Comply with local ordinances.
Route supply lines through housing bottom bushings, fix securely, ensure no damage from screws.
Details surface and flush mounting procedures, including using drill holes and mounting boxes.
Illustrates electrical connections for the escape door control terminal, including terminals and components.
Details configuration via jumpers (JP1, JP2), DIP switch S4, and rotary switches S1, S2, S3.
Details bus operation for 1340-20/-21 models, including control via bus panel and function availability.
Ensure all elements and electrical connections are correct, especially danger release elements.
Unlocks door for a set time via rotary switch S1; indicated by green LED flashing.
Door permanently unlocked via closed contact; green LED continuously lit.
Connect fire alarm to terminals 13/14 for immediate door unlock; acoustic alarm via DIP switch S4-4.
If no fire alarm, terminals 13/14 need a jumper. Acknowledge/reset alarm via fire alarm system.
Building operators must ensure annual inspections by technical specialists and issue certificates.
Details rated voltage, power consumption, fuses, and contact loading capacity for 12V systems.
Details rated voltage, power consumption, fuses, and contact loading capacity for 24V systems.
