15Configuration
EN
Change authorisation codes for authorisation levels
1 Press the symbols in the following order:
2 Enter your authorisation code.
3 Press the System (Fig. 6) menu item.
4 Press the User Administration menu item.
The keyboard is displayed.
5 Press one of the symbols according to an authorisation code (Tab. 2, page 13).
6 Assign a new authorisation code.
Delete any numbers entered by mistake with the [
] key
7 Confirm the entry with the [
] key.
You have changed an authoisation code
8 If necessary, repeat from step 5 until all authorization codes have been
changed.
Fig. 6 :
The
"System–
User Administration”
menu
Authorisation
level
Control
Settings
Installation
To Next Page
Loading...
