17Configuration
EN
Installation wizard
The installation wizard is provided for simple configuration and the system test,
particularly for the initial commissioning. A sequence of routines is processed
automatically.
Once it has been started, the installation wizard dialogue shows a series of
confirmation messages and user prompts.
Note!
Process the entire dialogue sequence: If a dialogue is closed via the Cancel key
or if the displayed action is not carried out, the installation must be started again
from the beginning. The RWT system configuration has not taken place and the
system cannot be locked.
Using the installation wizard
1 Press the
· Continue or OK button if the entire dia-
logue message is correct or if you have
taken the necessary action,
· the Cancel button if any part of the
dialogue message is incorrect or if you
have not taken the necessary action.
The installation is finished if you have been able to exit all messages with the
Continue or OK button.
Once the installation is complete, the ePED
®
1386D10 door terminal is in
normal operation status.
I
Fig. 7 :
Example of a
prompt for action
To Next Page
Loading...
