24 Configuration
EN
Resetting to factory settings
If reset to factory settings, changes to operating data are lost. The device must
then be configured.
Within the first five seconds after switching on the operating voltage, the device
can be reset to the factory settings.
Reset to factory settings
1 Switch off the voltage supply for at least
10 seconds.
2 Switch the voltage supply on again.
The symbol
is shown.
3 Press the symbol
.
4 Press the center of the display.
5 Answer to the confirmation request.
After confirming the request the device is
ready for use again and must be
configured.
Fig. 10:
Resseting
To Next Page
Loading...
