Assa Abloy Effeff ePED 1386D10 - System test wizard for maintenance

23Configuration
EN
Performing maintenance with system test wizard
The system test wizard is used during the annual maintenance. It is a support
programme for the manual door check (Fig. 9).
1 Press the symbols in the following order:
2 Enter your authorisation code.
3 Press the System menu item.
4 Press the Maintenance menu item.
 You are in the Maintenance menu.
5 Press the Maintenance menu item.
 You have started the system test wizard.
6 Follow the instructions shown.
6.1 Press the Continue button to continue to test.
6.2 Press the Cancel button to cancel the test incomplete.
Fig. 9 :
The
"System –
Maintenance–
System test” menu