29
EN
Functions and operation
Signals
The external door fitting contains a signal LED and a buzzer. The signals and their
meanings are explained in the following tables.
Normal operation
There is no fault present in the normal operating mode.
LED signal Meaning
Door can be opened.
Door cannot be opened.
4x Door cannot be opened (permanently locked).
10x Cannot be locked again once released.
Battery change required
The battery is low or empty (“Replacing the battery”, page 45).
LED signal Meaning
Battery is very low.
Access is only granted after a waiting period of
15 seconds and once the door code has been
entered again. The waiting time is increased to
60 seconds after 100 on-site inspections.
Battery is empty.
The door fitting no longer grants access.
Programming mode
The ESA500 / ESA501 electronic door fitting is in programming mode.
LED signal Buzzer Meaning
1x long Input action required.
3x short Input action not required.
1x short Additional inputs required.
– 125 ms Touchtone keys: audible beep con-
firms the push of a button.
Tab. 1:
Status messages
normal operation
green
red
red
red
Tab. 2:
Status messages
battery
yellow
5 s
yellow
yellow
5 s
red
redred
5 s
5 s
Tab. 3:
Status messages
programming
mode
green
red
orange
To Next Page
Loading...
