Associated Electrics RC10 B6.4D TEAM KIT - Page 22

22
:: :: Bag 10 - Step 6Bag 10 - Step 6
:: :: Bag 10 - Step 7Bag 10 - Step 7
91158
M3 x 4mm
BHCS
x2x2
91866
B6.2 Wing,
front
91981
B6.4 Body,
clear
Trim the front edge
of the wing straight.
Trim lines for shock
clearance used
ONLY for shocks
mounted on the
rear of the arms.
!
Install hook and loop
tape (#91743) along
the side braces in 2
spots.
One near the front, and
one in the middle.
Install the opposite side
of the hook and loop
tape inside the body!
!
Front of Vehicle
6° - Mount under wing - KIT
3° - Mount on top of wing
0° - Mount under wing
Wing Mount
91718
Wing
Button
91741
Wing,
B6
91718
Wing
Mount
25202
M3 x 10mm
FHCS
x2x2
x2x2