Associated Electrics RC10 B6.4D TEAM KIT - Page 23

23
:: :: Bag 10 - Step 8Bag 10 - Step 8
:: :: Bag 10 - Step 9Bag 10 - Step 9
:: :: Bag 10 - Step 10Bag 10 - Step 10
Wheels, Tires, and
Inserts are
not included!
Wheels, Tires, and
Inserts are
not included!
Wheels, Tires, and
#1597
CA glue
#1597
CA glue
Carefully apply CA glue
(tire adhesive) to the tire
bead on the side. Do one
side at a time, allowing it
to dry before gluing the
other side!
CA glue not included!
!
Build x2 Build x2
Body Trimming / Mounting:
There are 2 body trimming options depending
on what transmission you choose to run.
• Cut Line A is for #3 endbell or #4 no fan
• Cut Line B is for running a fan #1 or #2 location.
Body Trimming for Length:
There are 2 body trimming options depending
on what transmission you choose to run.
• Cut the body on the top/rear, long for the
B6.4, shorter for the B6.4D
Build 2 (1 left, 1 right) Build 2 (1 left, 1 right)
91150
M4 Low Profile
Serrated Steel
Wheel Nuts
91150
M4 Low Profile
Serrated Steel
Wheel Nuts
Cut Line A
Cut Line B
+3 Carpet length
Cut Line A and B
same, no fan on the
right side
B6.4
+3 Carpet
B6.4D