4
:: :: Quick Start GuideQuick Start Guide
:: :: Quick Start GuideQuick Start Guide - (cont.) - (cont.)
:: :: Quick Start GuideQuick Start Guide - (cont.) - (cont.)
Battery Charging Steps and Safety:
Remove the battery from the vehicle before charging.
Place battery on a re resistant surface.
Avoid any contact with water or other liquids.
Be sure to select the correct charging mode for the type
of battery you are charging.
ALWAYS use a compatible charger for charging your batteries.
Caution: Never leave the battery unattended while charging.
Always disconnect the charger from the power source when
nished charging.
Caution: Always disconnect the battery when you are
nished driving the vehicle.
Battery Installation:
1. Install the battery with the battery wires directed
towards the rear of the vehicle.
2. Secure the battery strap using two body clips.
Peak Detection
Quick Charger
1 2
Battery Notes and Tip:
Connect the battery as shown.
Disconnect the battery when not in use!
LiPo: LiPo batteries (lithium polymer) are high current
rechargeable batteries. LiPo batteries o er extended run time
and peak performance over NiMH batteries. They require a
peak detection charger designed speci cally for LiPo batteries.
These batteries require special care and handling.
LiPo batteries are recommended for advanced users only!
ALWAYS charge a LiPo battery in LiPo mode.
To Next Page
Loading...
