EasyManua.ls Logo

Associated Environmental Systems SD-302 - Page 39

Default Icon
46 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5-8
Trouble & Possible Cause Symptom & Remedy
D. No temperature pull up.
1. No power to heater.
2. Power to heater.
REMEDY: Check overload and system
pressure.
1a. No power to chamber.
REMEDY: Check fuse or circuit breaker in
your line.
1b. Temperature controller defective.
REMEDY: Replace controller.
1c. Heat switch defective.
REMEDY: Replace switch.
1d. Relay defective (applies only for models
having relays.)
REMEDY: Replace relay.
1e. Heater connection loose or heater
defective.
REMEDY: Check connection to heater or
replace heater.
1f. Heat link open.
REMEDY: Replace heat link (do not attempt
to repair and do not short it out.)
2a. Heater connection broken.
REMEDY: Correct connection.
2b. Heater burned out.
REMEDY: Replace heater.