AST AD511 - Figure 4. Schematic diagram for system connections

To Previous Page

Figures | Applied Satellite Technology

Figure 4. Schematic diagram for system connections

 Mount AD511 active antenna with clear view of sky using bracket

supplied.

 Attach top end of coax down-lead to N type connector on underside

of antenna.

 Attach bottom end of down-lead to N type connector to the Power

Break-In Box AD510-40 . The down-lead must not be shortened by the

user.

 Attach interconnect between TNC on AD510-40 and telephone (or

base station) using the antenna adapter provided with the phone.

 Attach DC supply lead to +18 to +36 v DC supply (600mA max). Red

lead to +supply, Blue to –supply.

 Turn on Iridium telephone and log-in.