Cleaning the ventilation
Clean the ventilation inlet and outlet regularly. Otherwise, there is the risk of your
projector overheating. At least every 10.000 hours of projecting.
Cleaning the ventilation is very important! When not done regularly de ventilation inlet and outlet
will be full with dust. This can cause the internal temperature of the projector to rise, which can
cause your projector to malfunction. Clean the ventilation at least every 10.000 hours of projection
time.
When removing the dirt in the ventilation hole, please use a brush. A vacuum cleaner can be used.
However, be very careful! An attachment on the vacuum cleaner should be used at all times.
To Next Page
Loading...