1.3. Casting & Bluetooth
Casting & screen mirroring
To share/cast the screen of your phone or another device to the projector, please first switch the
cast-function on in the projector. Follow the following steps:
1. Turn on the projector.
2. Connect the projector to the same WiFi-network as the device from which you want to cast.
3. Navigate to Settings on the projector.
4. Update the application AirScreen.
5. Open the application AirScreen.
6. Navigate in the application AirScreen to Settings.
7. Turn on the function ‘Cast’.
8. Select the screen of your device you would like to share on the projector.
Note: if you would like to play a movie in the Netflix-application, please connect the projector with
an HDMI-cable. Otherwise, video capabilities in Netflix could be limited due to copyright reasons.
Bluetooth
You can use the Bluetooth function to connect devices, such as speakers, to the projector. Follow the
steps below to connect devices:
1. Navigate to settings via the navigation bar at the top of the screen.
2. Open Bluetooth settings.
3. Click on "Add accessory".
4. Select the device you want to connect to.
5. The connection is set up and ready to use.
NOTE: It is not possible to cast a screen via Bluetooth.
To Next Page
Loading...