25
8. CARACTERISTIQUES TECHNIQUES:_______________________________________________________________________________
SPÉCIFICATIONS TECHNIQUES:
Tension de service standard
230V AC – 50/60 Hz.
Câble: 3 x 1.5 mm
2
, long. 2 m.
Smart+ 60 / 42350 / 52569 0.58 A
Smart+ 100 / 42351 / 52570 1.11 A
Smart+ 160 / 42352 / 52571 1.45 A
Fusible
Smart+ 60 / 42350 / 52569 2A T (5x20 mm)
Smart+ 100 / 42351 / 52570 3.15A T (5x20 mm)
Smart+ 160 / 42352 / 52571 4A T (5x20 mm)
Voltage sortie
8 – 9V DC / Câble 3 x 4 mm
2
, long. 2 m.
Smart+ 60 / 42350 / 52569 12 A (2x6 A)
Smart+ 100 / 42351 / 52570 24 A (2x12 A)
Smart+ 160 / 42352 / 52571 32 A (2x16 A)
Production
Smart+ 60 / 42350 / 52569 10 – 12 g./h.
Smart+ 100 / 42351 / 52570 20 – 24 g./h.
Smart+ 160 / 42352 / 52571 25 – 32 g./h.
Débit recirculation minimum
Smart+ 60 / 42350 / 52569 2 m
3
/h.
Smart+ 100 / 42351 / 52570 4 m
3
/h.
Smart+ 160 / 42352 / 52571 6 m
3
/h.
Nombre électrodes
Smart+ 60 / 42350 / 52569 5
Smart+ 100 / 42351 / 52570 7
Smart+ 160 / 42352 / 52571 7
Poids net
Smart+ 60 / 42350 / 52569 11 Kg.
Smart+ 100 / 42351 / 52570 13 Kg.
Smart+ 160 / 42352 / 52571 15 Kg.
CARACTÉRISTIQUES GÉNÉRALES:
Système de contrôle
Microprocesseur.
Clavier de membrane avec des boutons de
contrôle et voyants indicateurs de
fonctionnement
E/S de control: 3 entrées (type contacte libre de
potentiel) pour état couverte automatique,
détecteur de débit externe et contrôleur de
ORP/Chlore résiduel.
Sortie cellule: contrôle de production (11 niveaux
discrets).
Rang de salinité / Température: 4 ... 6 g/l. / 15
o
C –
40
o
C
Auto-nettoyage
Inversion de polarité automatique
Température de travail
0
o
C à +40
o
C
Réfrigération: convection naturel.
Matériel
Source d’alimentation
ABS bleu
Aluminium
Cellule d’electrolyse
Métacrylate bleu
Interrupteur flux
Corps: plastique (Noryl PPO)
Palette: plastique (Noryl PPO)
Axe: acier inoxydable 1.4571
Aimant: ferrite dur
O-ring: EPDM
IP 54
Câble 3 m.
Sonde pH (modèles SMART+PH)
Corps: plastique (Noryl PPO)
Rang: 0 -14 pH
Électrolyte solide
Protecteur bleu
Câble 3 m.