Installation Guide - Igloo Plus - Size L
Page 05Proudly manufactured by ARSAT® in the European Union
The Astreea® Igloo must be secured to the ground using the aluminum fixing
clamps, included in the package, and screws that are suitable for your ground
material. If you are not sure which screws are suitable, seek the help of
qualified personnel from your local hardware store.
If the Igloo is installed on soft ground or surfaces where the clamps cannot be
secured to the ground, then other means must be used to keep the Igloo
secured during windy conditions.
assembled and fixed to the ground.
or damage may occur.
clean cloth, warm water and a mild detergent.
bleach or acetone that could
damage the igloo!
tumble dry, dry clean or iron the cover!
The Canopy cover can be machine washed following the instruc-
tions on the label.
or caustic cleaning products or hard
brushes for cleaning!
After disassembly, make sure all parts
are clean and dry.
in a cool, dry, well-ventilated space, protected
from frost, direct sunlight and other heat sources.
change of color and an early aging of the materials.
To Next Page
Loading...