EasyManua.ls Logo

Astria Superior EOS18MN - Specifications; Service Hints; Technical Service; Replacement Parts

Default Icon
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
www.Astria.US.com
126854-01A32
REPLACEMENT PARTS
Note: Use only original replacement parts.
This will protect your warranty coverage for
parts replaced under warranty.
Contact authorized dealers of this product.
If they can’t supply original replacement
part(s), call INNOVATIVE HEARTH PROD-
UCTS at 1-800-655-2008.
When calling, have ready
your name
your address
model and serial numbers of your heater
how heater was malfunctioning
type of gas used (propane/LP or natural
gas)
purchase date
Usually, we will ask you to return the part to
the factory.
SPECIFICATIONS
EOS18MN
Rating: 25,000/36,000 Btu/hr
Gas Type: Propane/LP
Ignition: Piezo
Manifold Pressure: 8.0" w.c.
Inlet Supply Pressure (inches of water):
Maximum - 14" w.c., Minimum - 11" w.c.
EOS18MP
Rating: 25,000/36,000 Btu/hr
Gas Type: Natural
Ignition: Piezo
Manifold Pressure: 3.5" w.c.
Inlet Supply Pressure (inches of water):
Maximum - 10.5" w.c., Minimum - 5" w.c.
SERVICE HINTS
When Gas Pressure Is Too Low
pilot will not stay lit
burners will have delayed ignition
heater will not produce specied heat
for propane/LP units, propane/LP gas sup-
ply may be low
You may feel your gas pressure is too low. If
so, contact your local propane/LP or natural
gas supplier.
TECHNICAL SERVICE
You may have further questions about instal-
lation, operation or troubleshooting. If so, con-
tact INNOVATIVE HEARTH PRODUCTS at
1-800-655-2008. When calling please have
your model and serial numbers of your heater
ready.
You can also visit our web site at
www.IHP.US.com.
WIRING DIAGRAM
Thermopile