Astro Machine AstroJet S1 Quick Start Guide

Page 1
Step 1
Remove Printer and Accessories
from packaging
Place Printer on a level, stable surface. Make
sure Printer is level.
Step 2
Assemble Ink Drip Tray Assembly
1. Select the High or Low Grate and install it
on the Ink Tray as shown [A].
High Grate [1] is for thinner media
(paper or envelopes).
Low Grate [2] is for thicker card stock
and cardboard.
Step 3
Install Ink Drip Tray Assembly
1. Open Ink Tank Door [A].
2. Release Latch [B] to raise Top Assembly.
3. Insert tabs on Ink Drip Tray into frame slots
[C] as shown.
4. Close Top Assembly.
AstroJet S1
Quick Start Guide

Astro Machine AstroJet S1 Specifications

General

Print Resolution	Up to 4800 x 1200 dpi
Print Speed	Up to 15 ppm (black), up to 10 ppm (color)
Maximum Print Width	8.5 inches
Ink Cartridges	4 (Black, Cyan, Magenta, Yellow)
Ink Type	Dye-based
Media Type	Plain paper, photo paper, envelopes, labels
Connectivity	USB 2.0