EasyManua.ls Logo

Astro Pneumatic Tool 52SL User Manual

Astro Pneumatic Tool 52SL
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Product Type:Model:
52SL
500X2 LUMEN WIRELESSLY RECHARGEABLE
FOLDING DOUBLE-SIDED LED SLIM LIGHT
Page 1
Study, understand and follow all instructions provided
with this product. Read these instructions carefully
before installing, operating, servicing or repairing this
tool. Keep these instructions in a safe accessible place.
INTENDED USE OF THE TOOL
The 52SL is designed hand-held portable rechargeable
light source which provides direct light to work areas.
Do not operate in dual light mode while looking at
this device. Do not use this tool outside of the designed
intent. Never modify the tool for any other purpose or use.
Caution: To help prevent personal injury
Use
of this product can expose you to chemicals
including ethylene glycol, gasoline vapors and
engine exhaust, which are known to the State of
California to cause cancer, birth defects, or
reproductive harm. Always wear ANSI approved
safety equipment, safety glasses and clothing when
using this product. Study, understand, and follow all
instructions provided with this product. Failure to
read and follow all warnings and operating
instructions may result in damages and serious
injury or death.
Always wear ANSI approved goggles when using this
product. (Users and By standers).
Never use this tool for any application other than for
which it was designed.
Only use accessories designed for this tool.
Never alter or modify this tool in any way.
Improper operation and/or maintenance of the tool,
modification of the tool, or use of the tool with
accessories not designed for it could result in serious
injury or death.
Always select the correct accessories of the correct
size and design for the job that you are attempting to
perform.
Always work in a clean, safe, well-lit, organized and
adequately equipped area.
Do not begin repairs without assurance that vehicle is
in secure position, and will not move during repair.
WARNING
WARNING
PRODUCT INFORMATION
BEFORE USE
DO NOT DISCARD – GIVE TO USER
Two 500 lumen main lights front and back for up to
1000 lumens when used as a flood light to illumine
areas like deep in engine bays
Includes USB-C charging cable and adapter for direct
charging or use wireless charging docks like
the 52SL-WCP magnetic dual charging pad to charge
one or more wirelessly
Massive twin lithium-ion battery 4,400mAh capacity
for 3.25+hrs of use from the main light on high
Adjustable dimming feature, press and hold power
button to lower or raise light output
Features a 180° folding design, 150 lumen top light,
base magnet, dual handle magnets, base hook and
charge level indicator lights
When unpacking, check the parts diagram and part
n
umber listing on page 2 to make sure all parts are
included. If any parts are missing or damaged,
please call your distributor.
Question and Answer IconNeed help?

Do you have a question about the Astro Pneumatic Tool 52SL and is the answer not in the manual?

Astro Pneumatic Tool 52SL Specifications

General IconGeneral
Model52SL
Light SourceLED
Power SourceBattery
Battery TypeLithium-Ion
Voltage3.7V
TypeWork Light
Lumens500 Lumens
Warranty1 Year

Summary

General Warnings and Instructions

Product Usage and Safety Guidelines

Study and follow all provided instructions before operating, servicing, or repairing the tool.

Intended Use and Limitations

Operational Parameters

Use as a portable light source. Do not operate in dual light mode or outside designed intent.

Health, Environmental, and Safety Precautions

Chemical Exposure and Personal Protective Equipment

Warning of chemical exposure risks and mandatory use of ANSI approved safety equipment.

Proper Tool Operation and Maintenance

Use only designed accessories, avoid modifications, and ensure correct operation for safety.

Before Use Procedures

Unpacking and Parts Verification

Check parts diagram on page 2 after unpacking. Contact distributor for missing or damaged parts.

Product Specifications

Charging and Battery Details

Details on charging voltage, battery capacity, charging times via Type-C and charging pad.

Operational Runtime and Light Output

Information on main light and top light operation times, lumen output, and color temperature.

Dimming Functionality

Adjusting Light Output

How to adjust light dimming by pressing and holding the power button for desired light level.

Battery Treatment and Charging

Initial Charging and Maintenance

Charge battery for 8 hours before first use and recharge at least once every 30 days.

Charging Indicators

Understand indicator lights: flashing green means charging, all green means complete.

Operational Safety Warnings

Eye Safety and Environmental Hazards

Avoid looking directly into the beam, do not use near open flames or with organic solvents.

Overheating and Placement

Do not cover the lens to prevent overheating. Position light carefully to ensure stability.

Parts Breakdown and List

Included Components

List of parts including Wall Adapter, USB-C cable, Hook, and Sticker Label for Magnet.