Astro Pneumatic Tool 78240 User Manual

Page 1
• Pinless design allows a full 360° of freedom for the
universal head to angle and rotate
• Swivel hex design transfers impact forces more
efficiently with greater durability
• Forged CRO-MO with lifetime warranty
Product Type:Model:
78240
10PC. 1/2" DRIVE NANO PINLESS
UNIVERSAL IMPACT SOCKETS - SAE
Study, understand and follow all instructions provided
with this product. Read these instructions carefully
before installing, operating, servicing or repairing this
tool. Keep these instructions in a safe accessible place.
INTENDED USE OF THE TOOL
The 78240 Nano Pinless Universal impact Socket Set is
designed to be used with a 1/2" drive impact wrench to drive
hex fasteners. Do not use this tool outside of the designed
intent. Never modify the tool for any other purpose or use.
Caution: To help prevent personal injury
• Use of this product can expose you to chemicals
including ethylene glycol, gasoline vapors and engine
exhaust, which are known to the State of California to
cause cancer, birth defects, or reproductive harm.
Flways wear ANSI approved safety equipment, safety
glasses and clothing when using this product. Study,
understand, and follow all instructions provided with
this product. Failure to read and follow all warnings
and operating instructions may result in damages and
serious injury or death.
• Always wear ANSI approved goggles when using this
product. (Users and By standers).
• Never use this tool for any application other than for
which it was designed.
• Only use accessories designed for this tool.
• Never alter or modify this tool in any way.
• Improper operation and/or maintenance of the tool,
modification of the tool, or use of the tool with
accessories not designed for it could result in serious
injury or death.
• Always select the correct accessories of the correct
size and design for the job that you are attempting to
perform.
• Always work in a clean, safe, well-lit, organized and
adequately equipped area.
• Do not begin repairs without assurance that vehicle is
in secure position, and will not move during repair.
WARNING
WARNING
DO NOT DISCARD – GIVE TO USER
PRODUCT INFORMATION
BEFORE USE
When unpacking, check the parts diagram and part
number listing on page 2 to make sure all parts are
included. If any parts are missing or damaged,
please call your distributor.

Astro Pneumatic Tool 78240 Specifications

General

Model	78240
Brand	Astro Pneumatic Tool
Working Pressure	90 psi
Air Consumption	4 CFM
Air Inlet	1/4" NPT
Material	Aluminum
Capacity	3/32", 1/8", 5/32", 3/16"

Summary

Safety Information

General Safety Instructions

Study and follow all instructions before operating, servicing, or repairing the tool. Keep instructions accessible.

Health and Chemical Exposure Precautions

Details chemical exposure risks, required safety equipment, and potential severe injury or death from improper use.

Product Usage and Features

Intended Use

Specifies the designed purpose and limitations for the impact socket set, prohibiting modification or other uses.

Product Features

Highlights pinless design for 360° freedom, swivel hex for efficient force transfer, and forged CRO-MO construction.

Preparation for Use

Before Use Checklist

Instructions to check parts against the diagram and list on page 2 for completeness before use.

Parts Identification

Parts Breakdown Diagram

Visual representation of all sockets and accessories included in the 10-piece set.

Parts List

Detailed list of part numbers, descriptions (e.g., 7/16" Nano Pinless Impact Socket), and quantities for each component.