42
you see the information notice, you install the battery incorrectly and
there is a risk of damaging the contacts;
2) after the proper placement of the battery, close the cover and press
it firmly with fastening screws;
Charging of Battery
Before charging the battery, carefully read the Chapter Operating
Instructions.
Before the first use of the device it is recommended to fully charge the
battery.
Connect the power adapter to the network and insert the microUSB
plug into the appropriate slot on the device. During charging, the power
icon on the screen of the device is activated, which will indicate the
successful start of the charging process.
It is recommended not to disconnect the device until the battery is
fully charged.
At the time of fully charged battery power icon on the screen is
completely filled, and animation indicating the charging process will be
suspended.
Note: In order to maintain a long-term performance of the battery and
prolong its service life, please follow the instructions below:
To Next Page
Loading...