A50 Wireless Headset PS FAQs 7
PS 4 SETUP
1. Ensure the Mode Switch on the Base Station is set to PS4.
2. Plug Micro end of the Micro USB cable into the Base Station and the USB end into
the PlayStation 4.
3. Plug TOSLink Optical Cable into the PS4 Optical Port and plug the other end into the
Optical In Port on the Base Station.
4. Your A50 Wireless Headset comes pre-paired to the Base Station. However, you will
need to charge your headset before use. To do so, use both hands to reseat the
headset into the Base Station.
5. Once the Base Station is connected to the PS4, the Base Station will detect
automatically as a USB device.
6. From the Dashboard, navigate to Settings then select Devices and select Audio
Devices.
7. Ensure Input Device is set to USB Headset (Astro A50 Voice) and the Output Device is
set to the same.
8. Ensure the Output to Headphones is set to Chat Audio.
9. Navigate back to the Settings menu, then select Sound and Screen.
10. Navigate to Audio Output Settings, and ensure Primary Output Port is set to Digital
Out (Optical) and Audio Format (Priority) is set to Bitstream (Dolby).
11. Change the Input and Output Device to USB Headset (ASTRO Wireless Transmitter).
12. To toggle to a new EQ preset, press the EQ Button until the desired preset is selected.
13. That’s it! Your A50 Wireless Headset and PS4 are set up and ready to game!
To Next Page
Loading...
Need help?
General
