Need help?Do you have a question about the ASTRO A50 and is the answer not in the manual?
General| Wireless | Yes |
|---|---|
| Battery Life | 15 hours |
| Type | Over-ear |
| Connectivity Technology | Wireless |
| Sound Output Mode | Surround Sound |
| Frequency Response | 20Hz - 20kHz |
| Impedance | 48 ohms |
| Weight | 380g |
| Microphone | Yes |
| Compatibility | PC, Mac, Xbox, PlayStation |
| Surround Sound | Dolby 7.1 |
| Wireless Technology | 2.4GHz |
| Connection | USB, Optical |
| Ear Cushions | Memory foam |
| Wireless Range | 30 feet |
Provides clear Dolby® Digital surround sound across all platforms.
Powers MixAmp™ Transmitter for voice chat on PlayStation Network and PC.
Charges the A50 Wireless Headset from the MixAmp™ Transmitter.
Holds the MixAmp™ Transmitter and A50 Wireless Headset for storage and charging.
Connect the MixAmp™ Transmitter to the PS4 using Micro-USB and optical cables for power and audio.
Power on the PS4 and MixAmp™ Transmitter. Headset and transmitter should be paired.
Set the PS4's primary output port to Digital Out (Optical) and format to Bit Stream (Dolby).
Configure the PS4 to output 'Chat Audio' to headphones for optimal experience.
Connect the MixAmp™ Transmitter to the PS3 using Micro-USB and optical cables for power and audio.
Power on the PS3 and MixAmp™ Transmitter. Headset and transmitter should be paired.
Enable 'Optical Digital' output and 'Dolby Digital 5.1 Ch' for game audio.
Set 'ASTRO Wireless Transmitter' as the input and output device for voice chat.
Connect the MixAmp™ Transmitter to the Xbox 360 using Micro-USB and optical cables for power and audio.
Power on the Xbox 360 and MixAmp™ Transmitter. Headset and transmitter should be paired.
Sign into a user profile and connect the Xbox LIVE® cable for chat.
Connect the Xbox LIVE® cable from controller to headset earpiece for chat.
Connect MixAmp™ Transmitter to PC via Micro-USB for power and optical for audio.
Power on the PC and MixAmp™ Transmitter. Headset and transmitter should be paired.
Set 'SPDIF Out' as the default playback device for game audio.
Set 'ASTRO WIRELESS TRANSMITTER' as the default recording device for voice chat.
Connect MixAmp™ Transmitter to Mac via Micro-USB for power and optical for audio.
Power on the Mac and MixAmp™ Transmitter. Headset and transmitter should be paired.
Set 'Digital Out' as the audio output device for game audio.
Set 'ASTRO WIRELESS TRANSMITTER' as the input device for voice chat.
Output the same optical signal received by the MixAmp™ Transmitter to another device.
Connect the OPT-OUT port of the MixAmp™ Transmitter to the optical input on your AV Receiver.
Connect the optical output of your television to the OPT-IN port on the MixAmp™ Transmitter.
Understand the LED status on the A50 headset for charging, power, and pairing modes.
Understand the LED status on the MixAmp™ Tx for power and Dolby® headphone status.
Identify controls on the A50 headset, including ports, volume, and EQ selection.
Locate controls on the MixAmp™ for power, pairing, and Dolby® headphone settings.
Understand the function of the Game/Voice Balance dial on the A50 headset.
Learn how to adjust the balance between game and voice audio using the earpiece controls.
Understand how to use the master volume wheel on the earpiece for overall audio adjustment.
Learn how to use and mute the A50's fixed microphone arm.
Understand the three EQ modes (Media, Core, Pro) for different audio experiences.
Identify the Power/Pairing and Dolby® Headphone buttons on the top of the MixAmp™ Tx.
Understand the function of PWR, AUX, OPT-OUT, OPT-IN, and USB ports on the rear.
Identify the USB Power/Voice and Optical Out Passthrough ports on the front.
Learn how to put the A50 headset and MixAmp™ Tx into pairing mode.
Understand the LED indicators that confirm successful pairing between devices.
Learn how to pair up to four A50 headsets and microphone limitations.
Connect the USB Charging Cable to charge the A50 headset and observe LED indicators.
Understand the battery life of the A50 headset and its charging cycle duration.
Identify the three parts of the display stand: Base, Spine, and Beak.
Follow steps to slide and snap the stand components together.
Understand how the assembled stand serves as a base for charging and display.
Learn how to update your A50s and platforms to the latest firmware.
Find answers to common issues and access the FAQ section.
Understand the 1-year warranty and registration requirements.
View detailed technical specifications for the A50 headset and MixAmp™ Tx.
Understand the conditions for FCC compliance regarding interference.
Review FCC limits and instructions for RF exposure compliance.
Understand the compliance statement for Class B digital apparatus in Canada.
Information regarding compliance with European directives.
Notes on proper disposal of electrical and electronic devices.
To Next Page
