ASTRO A50 - Astro A50 Display Stand; Display Stand Parts; Assembling the Display Stand; Display Stand Usage

ASTRO GAMING
CONFIDENTIAL 2013
EYES ONLY
010185
DISPLAY STAND
Display Stand - Permanent Assembly
Your display stand arrives in three parts: Base, Spine, and Beak.
To assemble:
Slide and snap in the tabbed edges of base piece
into the corresponding edges of the spine.
Slide and snap the tabbed edge of the beak into
the top of the spine.
Once assembled, the Display Stand functions as a base for your
MixAmp™Tx and A50s for charging and display. The stand is
not meant to be taken apart.
1.
2.