5
Power Meter Display While Charging Other Devices
LED Power Meter:
Charging
LED Display Battery Capacity
First light blinking < 25%
First light on, second light blinking 25% - 50%
Two lights on, third light blinking 50% - 75%
Three lights on, fourth light blinking 75% - 99%
Four lights on Fully charged
How to Use the Astro E5 to Charge Other Devices
The Astro E5 is suitable to charge all DC-5V input devices.
1. Plug the USB power wire to the Astro E5 USB output port.
2. Attach the remaining end of the USB power wire to your device.
3. Press the power button to begin charging your device.
4. The LED indicators will extinguish automatically when your device is fully
charged.
To Next Page
Loading...
Need help?
General