● Ensure that your car engine is running before you use it.
OPERATION INSTRUCTIONS
● Use the “M” button to set your desired pressure unit (4 options:
KPA,PSI, BAR, KG/CM²).
● Use the “ + ”and “ - ” buttons to set the
chosen pressure. Use the tire pressure
guide on the inside of the driver’s door for
guidance. Make sure that the preset
pressure is higher than the current
pressure of your tire.
● Remove the valve cap from the valve stem
of your tire, then attach the air nozzle to the
valve stem.
Tips:In order to get a strong seal, place the
nozzle directly onto the tire valve. Putting the
air chuck on the nozzle from an angle could
result in an improper seal or inaccurate
reading. Once the air chuck is placed, thread
the nozzle to create a strong seal.
● Plug the inflator pump into your car’s 12V outlet securely, to ensure
a strong connection.
PSI
BAR
KPA
Kg/cm²
PSI
Kg/cm²
BAR
KPA
M
PSI
Kg/cm²
BAR
KPA
M
To Next Page
Loading...