0)
O
• Press the HOLD button to hold or cancel the data
• Press this button while performing a test to hold
(freeze) the reading for recording, then the screen
will keep the reading when the hold function is
activated. Press the HOLD button again
to turn off this function
• NOTE: The screen will display" R" when the data
hold function is activated
• Press the Backlight button to turn on the screen's
backlight. The backlight allows you to get a clear
reading in a dim environ ment. When the backlight is
tumed on, it will turn dark slowly until it is completely off.
When the light tums dark, press the button again and it
will turn bright again. If you need to turn off the backlight
quickly, move the rotary switch to the off position.
MA-xIOSEC FUSED
EACH 15 MIN
10Awx A
• Plug the red test lead into IOA terminal when using the
IOA setting of DC current test.
• Plug the red test lead into "@' terminal when you need
to use functions other than IOA
• Plug the black test lead into the COM terminal
To Next Page
Loading...
