• Remove the insulating sleeve and screws on the back cover of the
Meter.
• Remove the blown fuses and replace them with new fuses of the
same specification, make sure that the fuses are loaded into the fuse
clip and clamped tightly.
F500mA/600V
Fl OA/600V
• Put the insulation cover, the battery and the battery cover back, and
ock the cover with screws.
THE SPECIFICATIONS OF FUSES:
• Fuse 1: F500mA/600V fuse;
• Fuse 2: FIOA/600V fuse;
OPERATION INSTRUCTIONS
• To avoid damage to the Meter, do not measure voltages
exceeding 500V.
• This Meter is a manual range Multimeter. Please be sure to
choose the correct measuring range to prevent damage
-9
To Next Page
Loading...
