Astronics Max-Viz 1500 - Page 3

Astronics Max-Viz Max-Viz 1500 3091-00019 Rev M
Revision History
Revision
Date
Change Description
-
2/16/07
Initial Release
A
2/26/07
Fixed header and footer to standardize with
other documents,
added text concerning two video outputs to
section 3.1.4,
and added Cable Assy – Sensor I/F to
Appendix A
B
9/25/07
Updated Max Power specification, changed the
name of Power Supply/Processor to Power
Supply, updated Interface connections to
remove Digital Video between Sensor and
Power Supply, removed Video # 2 output from
Power Supply, updated connector backshell
part numbers, updated description of video
outputs in section 3.1.4 to reflect a single
video output, updated power-up sequence in
section 4. Operation. Updated Interface
Drawing 952500015 and Cable Assy- EVS
1500 Sensor Interconnect 955000016, in
Appendix A.
C
2/21/08
Update the weight of the Power Supply LRU to
< 2.65 lbs.
D
4/16/08
Updated the Export Control section 2.4 from
ITAR controlled to Commerce Controlled and
changed the NUC period from 5 to 4 minutes
E
8/14/08
Updated the Interface Drawing and Sensor
Interconnect Drawing in Appendix A
F
5/1/09
Removed mention of black hot polarity from
page 11, clarified heater control in 6.4 Halo
Images, all mentions of NUC interval are now
4 minutes and fixed several typos.
G
12/08/2010
Updated the Max-Viz logo on page 1,
Updated the address on this manual,
Updated Warranty Form and Customer Service
form to latest revisions.