2-22
Chapter 2: BIOS Setup
Resources Controlled By [Auto(ESCD)]
This field sets control over the IRQ resources by the automatic (ESCD) system or
manual assignment of IRQ channels. The default enables automatic (ESCD) control.
Configuration options: [Auto(ESCD)] [Manual].
PCI/VGA Palette Snoop [Disabled]
This field enables the PCI/VGA palette snoop. This feature is disabled by default.
Configuration options: [Enabled] [Disabled]
2.4.5 PnP / PCI Configurations
Power On By PS/2 Mouse [Disabled]
When set to [Enabled], this parameter allows you to use the PS/2 mouse to turn on
the system. This feature requires an ATX power supply that provides at least 1A on
the +5VSB lead. Configuration options: [Disabled] [Enabled]
Power On By PS/2 Keyboard [Disabled]
This parameter allows you to use specific keys on the keyboard to turn on the
system. This feature requires an ATX power supply that provides at least 1A on the
+5VSB lead. Configuration options: [Disabled] [Any KEY] [Power Key]
To Next Page
Loading...
