Asus A8N-E - LAN Cable Status; PEG Link Mode

2-302-30
2-302-30
2-30
Chapter 2: BIOS setupChapter 2: BIOS setup
Chapter 2: BIOS setupChapter 2: BIOS setup
Chapter 2: BIOS setup
2.4.62.4.6
2.4.62.4.6
2.4.6
PEG Link ModePEG Link Mode
PEG Link ModePEG Link Mode
PEG Link Mode
Select Menu
Item Specific Help
JumperFree Configuration
PEG Link Mode [Auto]
PEG Root Control [Auto]
PEG Buffer Length [Auto]
Phoenix-Award BIOS CMOS Setup Utility
Advanced
The following item is user-configurable only when the AI Overclocking
item is set to [AI N.O.S.].
N.O.S. Option [Disable]N.O.S. Option [Disable]
N.O.S. Option [Disable]N.O.S. Option [Disable]
N.O.S. Option [Disable]
Sets the Non-Delay Overclocking System mode.
Configuration options: [Disable] [Overclock 3%] [Overclock 5%]
[Overclock 8%] [Overclock 10%]
POST Check LAN cable [Disabled]POST Check LAN cable [Disabled]
POST Check LAN cable [Disabled]POST Check LAN cable [Disabled]
POST Check LAN cable [Disabled]
Enables or disables checking of the LAN cable during the Power-On
Self-Test (POST). Configuration options: [Disabled] [Enabled]
2.4.52.4.5
2.4.52.4.5
2.4.5
LAN Cable StatusLAN Cable Status
LAN Cable StatusLAN Cable Status
LAN Cable Status
The items in this menu displays the status of the Local Area Network
(LAN) cable.
Select Menu
Item Specific Help
JumperFree Configuration
POST Check LAN Cable [Disabled]
Pair Status Length
1-2 Open N/A
3-6 Open N/A
4-5 Open N/A
7-8 Open N/A
Phoenix-Award BIOS CMOS Setup Utility
Advanced
PEG Link Mode [Disabled]PEG Link Mode [Disabled]
PEG Link Mode [Disabled]PEG Link Mode [Disabled]
PEG Link Mode [Disabled]
Allows you to enhance the performance of your PCI Express graphics card.
Configuration options: [Auto] [Slow] [Normal] [Fast] [Faster]
PEG Root Control [Auto]PEG Root Control [Auto]
PEG Root Control [Auto]PEG Root Control [Auto]
PEG Root Control [Auto]
Allows you to enable or disable the PCI Express graphics root control.
Configuration options: [Auto] [Enabled] [Disabled]