Asus A8V Deluxe - Jumperfree Configuration

ASUS A8V Deluxe motherboard 4-27
4.4.5 JumperFree Configuration
Palette Snooping [Disabled]
When set to [Enabled], the pallete snooping feature informs the PCI
devices that an ISA graphics device is installed in the system so that the
latter can function correctly. Setting to [Disabled] deactivates this feature.
Configuration options: [Disabled] [Enabled]
IRQ xx [Available]
When set to [Available], the specific IRQ is free for PCI/PnP devices to
use. When set to [Reserved], the IRQ is reserved for legacy ISA devices.
Configuration options: [Available] [Reserved]
Configure System Frequency/Voltage
AI Overclocking [Standard]
AI Overclocking [Standard]
Allows selection of CPU overclocking options to achieve desired CPU
internal frequency. Select either one of the preset overclocking options and
the relevant parameters will appear.
Configuration options: [Auto] [Manual] [Standard] [Overclock 3%]
[Overclock 5%] [Overclock 7%] [Overclock 10%] [Adaptive Overclocking]
The following items appear only when the AI Overclocking field is set
to Manual.
CPU FSB Frequency [200MHz]
Allows you to adjust the CPU FSB operating frequency.
Configuration options: [200MHz] [201 MHz] ~ [300MHz]
Selecting a very high CPU frequency may cause the system to
become unstable! If this happens, revert to the default setting.
CPU Speed/Voltage Setting [Auto]
Allows you to set a specific VCore offset voltage.
Configuration options: [Auto] [Manual]