1. Unplug the power cable/DSL modem. If it has a battery backup, remove the
battery.
NOTE: If you are using DSL for the Internet, you will need your username/password from your Internet Service
Provider (ISP) to properly configure the router.
2. Connect your modem to the router with the bundled network cable.
3. Power on your cable/DSL modem.
4. Check your cable/DSL modem LED lights to ensure the connection is active.
Setting up your router
You can set up your router via a wired or wireless connection.
A. Wired connection
1. Plug your router into a power outlet and power it on. Connect the network cable from your computer to a LAN port
on your router.
To Next Page
Loading...
