Asus Crosshair V Formula ThunderBolt - Tool

ROG Crosshair V Formula
4-9
4.3.2 Tool
TurboV EVO
ASUS TurboV EVO introduces Manual Mode that allows you to manually adjust
the CPU frequency and related voltages as well as Auto Tuning function that offers
automatic and easy overlocking and system level up. After installing AI Suite II from
the motherboard support DVD, launch TurboV EVO by clicking Tool > TurboV
EVO on the AI Suite II main menu bar.
Refer to the software manual in the support DVD or visit the ASUS website at
www.asus.com for detailed software conguration.
Manual Mode
Manual Mode allows you to overclock the BCLK frequency, CPU voltage, IMC
voltage, and DRAM Bus voltage in WIndows® environment and takes effect in
real-time without exiting and rebooting the OS.
Refer to the CPU documentation before adjusting CPU voltage settings. Setting
a high voltage may damage the CPU permanently, and setting a low voltage
may make the system unstable.
For advanced overclock ability, adjust rst the BIOS items, and then proceed
more detailed adjustments in More Settings.
Save the current
settings as a new
prole
Voltage
Adjustment bars
Current values
Target values
Load prole
Manual Mode
Auto Tuning Mode
Click to show / hide
more settings
Applies all changes
immediately
Undoes all changes
without applying
Click to restore all
start-up settings
For system stability, all changes made in TurboV will not be saved to BIOS
settings and will not be kept on the next system boot. Use the Save Prole
function to save your customized overclocking settings and manually load the
prole after Windows starts.