4-20 Chapter 4: Software support
4.3.6 Probe II
Probe II is a utility that monitors the computer’s vital components, and detects and
alerts you of any problem with these components. Probe II senses fan rotations,
CPU temperature, and system voltages, among others. Because Probe II is
software-based, you can start monitoring your computer the moment you turn
it on. With this utility, you are assured that your computer is always at a healthy
operating condition.
Launching Probe II
After installing AI Suite II from the motherboard support DVD, launch PC Probe II
by clicking Tool > Probe II on the AI Suite II main window.
Monitoring hardware
The hardware monitor panels display the current value of a system sensor such
as fan rotation, CPU temperature, and voltages. Click the tab on the top to switch
display content. Click the box before each sensor to enable the alert function.
Adjusting the sensor threshold value
You can adjust the sensor threshold value in the monitor panel by moving the
sliders.
To Next Page
Loading...
