3-6 Chapter 3: BIOS setup
Scroll down to display the following items:
Ai Overclock Tuner [Auto]
Allows you to select the CPU overclocking options to achieve the desired CPU
internal frequency. Select any of these preset overclocking conguration options:
[Auto] Loads the optimal settings for the system.
[Manual] Allows you to individually set overclocking parameters.
[D.O.C.P.] Allows you to select a DRAM voltage.
OC Tuner [CANCEL]
OC Tuner automatically overclocks the frequency and voltage of CPU and DRAM.
Conguration options: [CANCEL] [OK]
CPU Ratio [Auto]
Allows you to manually adjust the maximum non-CPB CPU ratio. Use <+> and
<-> keys to adjust the value. The valid value ranges vary according to your CPU
model.
Memory Frequency [Auto]
Allows you to set the memory operating frequency. Conguration options: [DDR3-
800MHz] [DDR3-1066MHz] [DDR3-1333MHz] [DDR3-1600MHz]
Selecting a very high memory frequency may cause the system to become
unstable! If this happens, revert to the default setting.
CPU/NB Frequency [Auto]
Sets the ratio between northbridge (in CPU) Clock and the CPU Bus frequency.
Conguration options: [Auto] [1400MHz] [1600MHz] [1800MHz] [2000MHz]
[2200MHz] [2400MHz] [2600MHz] [2800MHz] [3000MHz] [3200MHz]
To Next Page
Loading...
