Asus Crosshair V Formula ThunderBolt - Page 93

ROG Crosshair V Formula
3-9
CPU Voltage Over-Current Protection [Auto]
This item provides wider total power range for overclocking. A higher value
brings a wider total power range and extends the overclocking frequency range
simultaneously.
Conguration options: [Auto] [100%] [110%] [120%] [130%] [140%] [Disabled]
Do not remove the thermal module while changing the DIGI+ VRM related
parrameters . The thermal conditions should be monitored.
Some of the following items are adjusted by typing the desired values using
the numeric keypad and press the <Enter> key. You can also use the <+> and
<-> keys to adjust the value. To restore the default setting, type [auto] using the
keyboard and press the <Enter> key.
CPU/NB Over-Current Protection [Auto]
This item provides wider total power range for overclocking. A higher value
brings a wider total power range and extends the overclocking frequency range
simultaneously.
Conguration options: [Auto] [100%] [110%] [120%] [130%]
CPU PWM Phase Control [Extreme]
Phase number is the number of woorking VRM phase. Increasing phase number
under heavy system loading to get more transient and better thermal performance.
Reducing phase number under light system loading to increase VRM efciency
[Standard] Proceeds phase control depending on the CPU loading.
[Optimized] Loads the ASUS optimized phase tuning prole.
[Extreme] Proceeds the full phase mode.
[Manual Adjustment] Allows manual adjustment
VRM Over Temperature Protection [Enabled]
CPU Voltage Frequency [Auto]
Allows you to select the CPU Voltage Frequency.
Conguration options: [Auto] [Manual]
VRM Fixed Frequency Mode [300]
This item appears only when you set the CPU Voltage Frequency item to
[Manual] and allows you to set a xed VRM frequency. Use the <+> and <->
keys to adjust the value. The values range from 300k Hz to 500k Hz with a
10k Hz interval.
CPU PWM mode [Extreme]
[T.Probe] Maintains the VRM thermal balance.
[Extreme] Maintains the VRM current balance.