Asus E210 Series - Page 44

Mini Desktop PC User Guide
44
5. Congure the type of IP address for network conguration.
To congure using a dynamic IP address:
a. Click Obtain an IP address automatically and click OK.
b. Proceed to Step 6 if you are using PPPoE connection.
To congure using a static IP address:
a. Click Use the following IP address.
b. Enter the IP address, Subnet mask and Gateway from your
service provider.
c. If needed, enter the preferred DNS Server address and
alternative address.
6. Return to the Network and Sharing Center and then click Set
up a new connection or network.
7. Select Connect to the Internet and click Next.
8. Select Broadband (PPPoE) and click Next.
9. Enter your User name and, Password, and Connection name.
Click Connect.
10. Click Close to nish the conguration.
11. Click the network icon in the taskbar and click the connection
you just created.
12. Enter your user name and password. Click Connect to connect
to the Internet.