Asus EB1036 - Page 53

EB1036 PC 53
English
6. Data on the default partition will be cleared. Click Recover to
start the system recovery.
NOTE: You will lose all your data on the selected partition. Ensure
that you back up your important data.
7. When the recovery is completed successfully, click Reboot to
restart the system.
Backing up the factory default environment data to a USB
drive (F9 Backup)
To back up the factory default environment data to a USB drive
(F9 Backup):
1. Press <F9> during bootup.
2. Select Windows setup [EMS Enabled] when this item appears
and press [Enter].
3. Select the language and click Next.
4. Select Recover the OS to the Default Partition and click Next.
5. Select Backup the Factory Environment to a USB Drive and
click Next.
6. Connect a USB storage device to your PC to start the Factory
Default Environment backup.
NOTE: The required size of the connected USB storage device
should be larger than 15GB. The actual size may vary with your PC
model.