EasyManua.ls Logo

Asus ESC4000 G2 GPU User Manual

Asus ESC4000 G2 GPU
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
15060-09V10000
Cache Vault Accessory Kit
Quick Start Guide
First Edition (V1) T7843
November 2012
Copyright © 2012 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any
means, except documentation kept by the purchaser for backup purposes, without the express written
permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless
such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the
product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),
EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY
DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS
MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identication or explanation and to the
owners’ benet, without intent to infringe.
Contents
Package contents.................................................................................. 2
Installing the Cache Vault Kit on the holder and the PIKE card ....... 3
Installing the Cache Vault Power Module on the steel clip and holder .....3
Standard installation of Cache Vault power module .................................3
Installing the Cache Vault Flash Module on the PIKE 2208 card .............4
Installing the Cache Vault Kit on specic ASUS server systems ..... 5
Installing the kit on RS720-X7/RS8, RS720-E7/RS12, RS720-E7/RS12-E
server systems .........................................................................................5
Installing the kit on TS700-X7/PS4, TS700-E7/RS8 server systems .......5
Installing the kit on RS920-E7/RS8, RS926-E7/RS8 server systems ......6
Installing the kit on ESC4000 G2 GPU server system .............................7
Question and Answer IconNeed help?

Do you have a question about the Asus ESC4000 G2 GPU and is the answer not in the manual?

Asus ESC4000 G2 GPU Specifications

General IconGeneral
Product NameESC4000 G2
MemoryUp to 512GB
GPU SupportUp to 4x Double-Width GPUs
Storage8 x 2.5" hot-swap
NetworkingDual-port Gigabit Ethernet
Operating System SupportWindows Server, Linux

Summary

Package Contents

Installing the Cache Vault Kit on the Holder and PIKE Card

Install Cache Vault Power Module on Steel Clip and Holder

Install the Cache Vault Power Module onto the steel clip and holder.

Standard Installation of Cache Vault Power Module

General installation method for the Cache Vault Power Module.

Install Cache Vault Flash Module on PIKE 2208 Card

Install the Cache Vault Flash Module onto the PIKE 2208 card.

Installing Cache Vault Kit on Specific ASUS Server Systems

Install Kit on RS720-X7/RS8, RS720-E7/RS12, RS720-E7/RS12-E Systems

Specific installation steps for RS720 series server systems.

Install Kit on TS700-X7/PS4, TS700-E7/RS8 Systems

Specific installation steps for TS700 series server systems.

Install Kit on RS920-E7/RS8, RS926-E7/RS8 Systems

Specific installation steps for RS920/RS926 series server systems.

Install Kit on ESC4000 G2 GPU Server System

Specific installation steps for ESC4000 G2 GPU server system.

Related product manuals