Asus M Series - Powering On the Monitor

2-4 Chapter 2: Setup
2.4 Turning on the monitor
Tap the power button . See page 1-2 for the location of the power button. The power
indicator
lightsupinwhitetoshowthatthemonitorisON.
• Tousetheearphone(onlywhenanHDMIcable,notthesuppliedHDMI-
DVIcable,isconnected):connecttheendwithplugtypetothemonitor’s
earphone jack.
Whenthesecablesareconnected,youcanchoosethedesiredsignalfromthe
Input Select item in the OSD menu.
• To connect the power cord:
a. Connectthepoweradaptersecurelytothemonitor’sDCinputport.
b. Connect one end of the power cord to the power adapter and the other
end to a power outlet.
• ToconnecttheVGA/HDMI-DVIcable:
a. PlugoneendoftheVGA/HDMI-DVIcabletothemonitor’sVGA/HDMI
port.
b. ConnecttheotherendoftheVGA/HDMI-DVIcabletoyourcomputer's
VGA/DVIport.
c. TightenthetwoscrewstosecuretheVGA/DVIconnector.