9. Select Broadband (PPPoE) and click
Next.
10. Enter your User name and,
Password, and Connection name.
Click Connect.
11. Click
Close to nish the
conguration.
12. Click the network icon in the taskbar
and click the connection you just
created.
13. Enter your user name and password.
Click Connect to connect to the
Internet.
Conguring a static IP network connection
To congure a static IP network connection:
1. Repeat steps 1 to 4 of the previous
section.
2 Click
Use the following IP address.
3. Enter the IP address, Subnet mask and
Gateway from your service provider.
4. If needed, enter the preferred DNS Server
address and alternative address.
5. When done, click
OK.
To Next Page
Loading...
