Asus M2N 1394 - Page 37

ASUS M2N 1394
1-27
8. ATX power connectors (24-pin ATXPWR, 4-pin EATX12V)
These connectors are for ATX power supply plugs. The plugs from the power
supply are designed to t these connectors in only one orientation. Find the
proper orientation and push down rmly until the connectors completely t.
• For a fully congured system, we recommend that you use an ATX 12 V
Specication 2.0-compliant power supply unit (PSU) with a minimum of 600
W power rating.
• Do not forget to connect the 4-pin ATX +12 V power plug; otherwise, the
system will not boot up.
• Use of a PSU with a higher power output is recommended when
conguring a system with more power-consuming devices. The system
may become unstable or may not boot up if the power is inadequate.
M2N 1394
®
M2N 1394 ATX power connectors
EATXPWR
ATX12V
+3 Volts +3 Volts
Ground
+5 Volts +5 Volts
Ground Ground
Power OK
+5V Standby
+12 Volts
-5 Volts
+5 Volts +3 Volts
-12 Volts
Ground Ground Ground
PSON#
Ground
+5 Volts
+12 Volts +3 Volts
+5 Volts
Ground
+12V DC GND
+12V DC
GND