2-36 Chapter 2: BIOS setup
Password Check [Setup]
When set to [Setup], BIOS checks for user password when accessing the Setup
utility. When set to [Always], BIOS checks for user password both when accessing
Setup and booting the system.
Conguration options: [Setup] [Always]
2.7 Tools menu
ASUS EZ Flash 2
ASUS O.C.Prole
2.7.1 ASUS EZ Flash 2
Allows you to run ASUS EZ Flash 2. When you press <Enter>, a conrmation
message appears. Use the left/right arrow key to select between [Yes] or [No],
then press <Enter> to conrm your choice. Please see page 4-2, section 4.1.2 for
details.
ASUSTek EZ Flash 2 BIOS ROM Utility V3.00
Current ROM
Update ROM
A:
B:
Note
[Enter] Select or Load [B] Backup [ESC] Exit
[Tab] Switch [Up/Down/Home/End] Move
FLASH TYPE: PMC 49FL004T LPC
PATH: A:\
BOARD: M2N 1394
VER: 0102
DATE: 08/23/06
BOARD: Unknown
VER: Unknown
DATE: Unknown