Asus M2V-MX SE - Page 68

2-26 Chapter 2: BIOS Setup
AGP Bridge K8M890 AGP/PCI EXPRESS Conguration
OnChip VGA Frame Buffer Size [64MB]
Primary Graphics Adapter [PCIE VGA]
VLink Mode Supported [Auto]
AGP Mode [AGP 8X]
Graphics Aperture Size [128MB]
Options for VIA AGP
Chipset
OnChip VGA Frame Buffer Size [128MB]
Sets the onchip VGA frame buffer size.
Conguration options: [Disabled] [64MB] [128MB] [256MB]
Primary Graphics Adapter [PCIE VGA]
Switches the PCI Bus scanning order while searching for a video card.
This allows you to select the type of Primary VGA in case of multiple video
controllers. Conguration options: [PCI VGA] [PCIE VGA]
[Integrated VGA]
VLink Mode Supported [Auto]
Sets the VLink 8X support. Conguration options: [Auto] [Mode 0]
[Mode 1] [Mode 2] [Mode 3] [Mode 4]
AGP Mode [AGP 8X]
Allows you to change the AGP mode for the onboard VGA.
Conguration options: [AGP 8X] [AGP 4X]
Graphics Aperture Size [128MB]
Allows you to select the size of mapped memory for onboard VGA graphic
data. Conguration options: [256MB] [128MB] [64MB] [32MB]
SouthBridge VIA VT8237S Conguration
SATA Controller [IDE]
LAN Controller [Enabled]
LAN Option ROM [Disabled]
High Denition Audio [Auto]
Front Panel Support Type [HD Audio]
PCI Delay Transaction [Enabled]
Options
IDE
RAID
SATA Controller [IDE]
Allows you to disablel or select the Serial ATA controller mode. Conguration
options: [IDE] [RAID]
LAN Controller [Enabled]
Allows you to disable or enable the onboard LAN controller.
Conguration options: [Disabled] [Enabled]