Asus M2V-MX SE - Page 79

ASUS M2V-MX SE 2-37
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
After you have set a supervisor password, the other items appear to allow you to
change other security settings.
Security Settings
Supervisor Password : Installed
User Password : Not Installed
Change Supervisor Password
User Access Level [Full Access]
Change User Password
Password Check [Setup]
<Enter> to change
password.
<Enter> again to
disabled password.
User Access Level (Full Access]
Allows you to select the access restriction to the Setup items. Conguration
options: [No Access] [View Only] [Limited] [Full Access]
No Access
prevents user access to the Setup utility.
View Only
allows access but does not allow change to any eld.
Limited
allows change only to selected elds, such as Date and Time.
Full Access allows viewing and changing all the elds in the Setup utility.
Change User Password
Select this item to set or change the user password. The User Password item on
top of the screen shows the default Not Installed. After you have set a password,
this item shows Installed.
To set a User Password:
1. Select the Change User Password item and press <Enter>.
2. On the password box that appears, type a password combination of at least six
(6) letters and/or numbers, then press <Enter>.
3. Conrm the password when prompted.
The message “Password Installed” appears after you have successfully set
your password.
The User Password item now shows Installed.